Side X Side World Forums banner
1 - 6 of 6 Posts

·
SSW Support Staff
Joined
·
1,819 Posts
I changed mine, it is an improvement in the reduction of dust in the intake, very little if any past the filter now, it does add extra noise to the cab area, since the intake is now inside.
 

·
SSW Director
Joined
·
5,457 Posts
Discussion Starter · #3 ·
Pops said:
I changed mine, it is an improvement in the reduction of dust in the intake, very little if any past the filter now, it does add extra noise to the cab area, since the intake is now inside.
What kind of system is it Mike ?
 

·
SSW Support Staff
Joined
·
1,819 Posts
RZRRich said:
Pops said:
I changed mine, it is an improvement in the reduction of dust in the intake, very little if any past the filter now, it does add extra noise to the cab area, since the intake is now inside.
What kind of system is it Mike ?
I's an EHS system out of North Carolina, Eric use to be a sponsor on PRC, and I won the base during the 08 rally.
 

·
Registered
Joined
·
6 Posts
Intake

My RZR came with an original proto BTI (From Dragonfire). I have 100 miles on the RZR since I bought it, (now it has 175miles) and the filter was spotless, just a little dust at the bottom of the can. The throttle body was spotless too, so I think all is good! I am in the process of either buying the trany new mount or making one myself, I will change the mount just incase, and monitor whats happening at the connection to the TB.

It is a nice unit, but if it were my money, I think I would try the plastic (donaldson) type that is being sold on ebay for around $250.

Have fun all!!!!
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top