Side X Side World Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Has anybody thought about putting Spray or Roll on Bed Liner ( Husky, Herculiner, Rhinoliner) on their Floorboard or Gas and Brake Pedals in the RZR for traction. Would it stick to this kind of plastic? I was thinking about doing it. Just wanted to see what people thought on the subject.
 

·
SSW Support Staff
Joined
·
614 Posts
Trever, I had a section of floor on the drivers side that i coated. The first attempt came loose and pealed of in one piece. The next time, I took emery cloth over it and than wiped it down with acetone, and it is there to stay. Good luck.
 

·
SSW Director
Joined
·
5,457 Posts
Like Doug said: Take your time doing the prep work (scuff everything up good / clean everything up good) and it should work fine Trevor
 

·
SSW Support Staff
Joined
·
1,819 Posts
Never thought about something like bed liner, as a non-skid in the RZR, does it work well once you get it to stick.
 
1 - 4 of 4 Posts
Top