Side X Side World Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
121 Posts
Discussion Starter · #1 ·
2- 1-1/2 PVC couplings, 2- 30w halogen landscape-light sealed beams.
The sealed beams fit perfectly in the couplings. Drilled two holes in the top, fastned them on the backside with Permatex Black Adhesive.
Installed the switch in the back-side of the shifter console. Bright, almost Too bright!!!!! 20watt'ers would work also. Probably got 25.00 in everything.





 

·
Registered
Joined
·
162 Posts
Now that is a great idea. Ithink it will be getting done on my RZR. I have the factory work lights on my Sportsman 500 and have always wanted them on the RZR. Thanks for posting this.
 

·
Registered
Joined
·
27 Posts
Nice job very clean install looks factory installed.
 

·
Registered
Joined
·
35 Posts
the lights look real nice but my rzr came from the factory with reverce lights or work lights but they are on a switch so i can use them for work or backing up but i thought reverse was only used for backing off the trailer correct me if i am wrong
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top