Side X Side World Forums banner
1 - 20 of 49 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
After the 10% discount code and FREE shipping from RMATV.com... and installing it.

I'm very happy with the looks and quality of it...
Full Front to Rear and Side to Side coverage. Full 3/8" thick, all edges are beveled and hardware is recessed.

For a total of $270 shipped to the front door.

Pictures of install HERE

Also.... just a quick note about the eBay seller listing the same item... I sent them one message with the same two questions as everyone else about the side to side width and the front to rear coverage, b/c the picture doesn't show it well... NO REPLY... for what it's worth... One phone call to RMATV... Helpful girl found the dimensions for me, gave me the coupon code and I ordered it.
 

·
SSW Support Staff
Joined
·
1,819 Posts
Thanks for the information, did you have to call them to get a discount?
 

·
Registered
Joined
·
15 Posts
Discussion Starter · #4 ·
Pops said:
Thanks for the information, did you have to call them to get a discount?
96639 is the code I used
10% off a $100 or more

Or do a search for more "Rocky Mountain Coupon Codes"...
There are several different codes active at anyone time.

Good Luck.
 

·
Registered
Joined
·
56 Posts
Wacker, one more question ...... where the two pieces of the main skid meet, does the front overlap the rear piece?
Doug I doubt it's any heavier than most 3/8" UHMW skids, don't recall the actual lbs. but it's a little lighter than aluminum, and a whole lot slicker!
 

·
Registered
Joined
·
15 Posts
Discussion Starter · #7 ·
Sorry.... Left to go riding on Wednesday and just got back...

The front and rear pieces over lap in the middle with a "lap joint" I think it's called.
I'd say the weight is between 30-35 pounds total. It seems very durable, if it cracks I'll be very surprised... :shock:
 

·
Registered
Joined
·
125 Posts
Seasonedsole said:
I'm thinking-------- X-Mas gift for Doug
Hey Doug,
FYI I got a set soming in this Friday. Just as posted FREE Shipping and a 10% discount. Fiqured for that price if I didn't like shape,holes, etc, I could alter to my specs :lol:
The Backyard Clutch Tester,
Bart
 

·
SSW Support Staff
Joined
·
1,819 Posts
Greg, do you have rock sliders or nerf bars, if you do are you still able to use them? Might get this for Christmas instead of some doors
 

·
Registered
Joined
·
15 Posts
Discussion Starter · #11 ·
Pops said:
Greg, do you have rock sliders or nerf bars, if you do are you still able to use them? Might get this for Christmas instead of some doors
I had the Rock Sliders but had to take off b/c the skid covers from side to side very nicely... it uses the four holes on both sides of the rocker panels/door jambs... I'm not really worried about the bars now b/c they just got hung up on everything to easy. But I looked again and think with a little bit of trimming you could leave them on pretty easily too.
 

·
SSW Support Staff
Joined
·
1,819 Posts
Wacker said:
Pops said:
Greg, do you have rock sliders or nerf bars, if you do are you still able to use them? Might get this for Christmas instead of some doors
I had the Rock Sliders but had to take off b/c the skid covers from side to side very nicely... it uses the four holes on both sides of the rocker panels/door jambs... I'm not really worried about the bars now b/c they just got hung up on everything to easy. But I looked again and think with a little bit of trimming you could leave them on pretty easily too.
Thanks for the information, I'm thinking this will be my Christmas present, well maybe 2 set. The "S" doesn't have any side protection currently, and the 08' has rock sliders.
 

·
SSW Director
Joined
·
5,457 Posts
The more I look at this set-up the more I like it - And as Mike stated, it very well could end up being one of those " from me to me " Christmas presents. :D
 

·
Registered
Joined
·
15 Posts
Discussion Starter · #14 ·
Wacker said:
Pops said:
Thanks for the information, did you have to call them to get a discount?
96639 is the code I used
10% off a $100 or more

Or do a search for more "Rocky Mountain Coupon Codes"...
There are several different codes active at anyone time.

Good Luck.
Well...... Here's ONE Better!!!

Spend:
$100 get $10 off
$150 get $20 off
$300 get $50 off
$500 get $100 off

Use Offer Code # RMC092

Good Luck :D
 

·
SSW Support Staff
Joined
·
1,819 Posts
Wacker said:
Wacker said:
Pops said:
Thanks for the information, did you have to call them to get a discount?
96639 is the code I used
10% off a $100 or more

Or do a search for more "Rocky Mountain Coupon Codes"...
There are several different codes active at anyone time.

Good Luck.
Well...... Here's ONE Better!!!

Spend:
$100 get $10 off
$150 get $20 off
$300 get $50 off
$500 get $100 off

Use Offer Code # RMC092

Good Luck :D

This just makes it sweeter, I received a letter from Paypal saying if I try their new service called BillLMeLater they will take $100 off my first purchase.
 

·
SSW Support Staff
Joined
·
1,819 Posts
I got it in the mail, they said they couldn't reach me through email.
 

·
SSW Support Staff
Joined
·
1,819 Posts
I just tried to buy a couple skid pans, found out the code is $100.00 store credit and BillMeLater wouldn't work. Going to call paypal tomorrow and find out why it didn't work.
 

·
SSW Support Staff
Joined
·
614 Posts
I should be receiving mine today, maybe I should call and they may give me an in house credit for the new code.
 
1 - 20 of 49 Posts
Top